How to Replace a Faulty Refrigerator Door Gasket

How to Replace a Faulty Refrigerator Door Gasket

A refrigerator door gasket plays a vital role in keeping your fridge sealed and maintaining a consistent temperature. If the gasket becomes cracked, torn, or worn out, your refrigerator may lose efficiency, leading to higher energy bills and spoiled food. Fortunately, replacing a faulty gasket is a straightforward DIY project.

Here’s a step-by-step guide to help you replace your refrigerator door gasket:

Tools and Materials You’ll Need:

  • Replacement gasket (specific to your refrigerator model)
  • Screwdriver
  • Bucket of warm, soapy water
  • Sponge or soft cloth
  • Hairdryer (optional)

Steps to Replace the Refrigerator Door Gasket:

  1. Purchase the Correct Replacement Gasket
    Before you begin, make sure you buy the right gasket for your refrigerator model. If you’re in Honolulu, Hawaii, PRS Parts Inc. is a reliable local appliance parts store that can help you find the exact gasket you need. Their knowledgeable team can guide you to the correct part and ensure compatibility.

  2. Remove the Old Gasket

    • Open the refrigerator door and locate the screws or retaining clips that hold the gasket in place.
    • Carefully loosen the screws but don’t remove them entirely; this will allow the old gasket to slide out easily.
    • Pull out the old gasket, noting how it is fitted around the door to make installation of the new one easier.

  3. Clean the Gasket Area

    • Use a sponge or cloth with warm, soapy water to clean the groove where the gasket sits.
    • Ensure the area is completely clean and dry to allow the new gasket to seal properly.

  4. Install the New Gasket

    • Start by aligning the new gasket with the top corners of the door.
    • Fit the gasket into the groove, pressing firmly as you go.
    • Tighten the screws or reattach the retaining clips to secure the gasket.

  5. Check and Adjust the Fit

    • Close the refrigerator door to test the seal. If you notice gaps or unevenness, gently heat the gasket with a hairdryer to make it more pliable and adjust it for a snug fit.

  6. Inspect the Seal

    • After installation, run your hand along the edges of the door to check for air leaks. A properly installed gasket will ensure an airtight seal.

Why Choose PRS Parts Inc. in Honolulu?

If you’re tackling appliance repairs, having a trusted local parts supplier like PRS Parts Inc. is invaluable. Located in Honolulu, Hawaii, PRS Parts Inc. specializes in high-quality appliance parts and has a friendly staff ready to assist with your repair needs. Instead of waiting for parts to ship from the mainland, you can get what you need quickly and locally, helping you complete your project without delays.

By following these steps, you can replace a faulty refrigerator door gasket and restore your fridge's efficiency. With the right tools, parts from a reliable supplier like PRS Parts Inc., and a bit of patience, you’ll have your appliance running like new in no time

Back to blog