How to Replace a Washer Lid Switch in 6 Simple Steps

How to Replace a Washer Lid Switch in 6 Simple Steps

The washer lid switch is a critical component that ensures your washing machine stops spinning when the lid is open. If your washer doesn’t start or spin, the lid switch may be faulty and need replacement. Here’s a step-by-step guide to replace it quickly and safely.


Tools and Materials Needed

  • Replacement lid switch
  • Screwdriver set
  • Nut driver
  • Pliers
  • Multimeter (optional for testing)

Step 1: Unplug the Washer

  • For safety, disconnect the washing machine from the power outlet.
  • If the washer is hardwired, turn off the circuit breaker.

Step 2: Access the Lid Switch

  1. Locate the Lid Switch: It’s typically positioned under the lid or near the lid hinge.
  2. Open the Top Panel: Depending on your washer model, you may need to:
    • Unscrew the top panel.
    • Use a putty knife to release spring clips and lift the panel.
  3. Disconnect Wires: Gently unplug the wires connecting the lid switch to the washer’s wiring harness.

Step 3: Remove the Old Lid Switch

  • Unscrew or unclip the lid switch from its mounting bracket.
  • Detach any screws, clips, or fasteners securing it in place.
  • Carefully pull out the old lid switch.

Step 4: Install the New Lid Switch

  1. Position the New Switch: Align the new lid switch with the mounting bracket or designated slot.
  2. Secure the Switch: Use screws or clips to fasten it firmly.
  3. Reconnect the Wires: Attach the wires to the new switch, ensuring they are securely connected.

Step 5: Reassemble the Washer

  • Lower the top panel back into place.
  • Screw or snap it securely.
  • Ensure all components are properly aligned and fastened.

Step 6: Test the Washer

  1. Plug the washer back into the power outlet.
  2. Run a short cycle with the lid closed to verify the switch is functioning correctly.
  3. If the washer starts and stops spinning when the lid is opened, the replacement is successful.

Tips for Success

  • Check Compatibility: Ensure the replacement lid switch matches your washer’s make and model.
  • Inspect for Damage: While accessing the lid switch, check surrounding components for wear or damage.
  • Source Quality Parts: Use high-quality replacement parts for durability and performance.

Find Washer Lid Switches at PRS Parts Inc.

If you need a replacement lid switch, PRS Parts Inc. in Honolulu, Hawaii, offers a wide range of washer parts. Their knowledgeable staff can help you find the right part for your machine, ensuring a hassle-free repair process.

Replacing a washer lid switch is a simple and cost-effective way to extend the life of your appliance. With these easy steps, your washing machine will be back in action in no time.

Back to blog