When to Replace Your Washer’s Drain Pump and How to Do It

When to Replace Your Washer’s Drain Pump and How to Do It

A washing machine’s drain pump is a crucial component that ensures your laundry water drains efficiently. Over time, the pump may wear out, leading to water drainage issues. Recognizing the signs of a failing drain pump and knowing how to replace it can save you time, money, and frustration. If you're in Hawaii, PRS Parts Inc., a trusted local company based in Honolulu, provides quality appliance parts to help you with your repair needs.

Signs You Need to Replace Your Washer’s Drain Pump

  1. Water Won’t Drain
    If your washer finishes its cycle but leaves water behind, the drain pump may be clogged or faulty.

  2. Unusual Noises
    Grinding, humming, or rattling sounds during the draining process often indicate a malfunctioning pump.

  3. Error Codes on Digital Washers
    Many modern washers display specific error codes for drainage problems, signaling a potential pump issue.

  4. Leaking Water
    A damaged pump may cause water to leak from your washer during or after a cycle.

  5. Burning Smell
    A burning odor could indicate the pump motor is overheating or failing.

Tools and Materials You’ll Need

  • Replacement drain pump
  • Screwdriver set
  • Towels or a bucket (to catch residual water)
  • Pliers
  • Work gloves

Step-by-Step Guide to Replacing Your Washer’s Drain Pump

1. Unplug the Washer and Turn Off the Water
Safety first! Disconnect the power supply and shut off the water valves before starting.

2. Remove the Washer Panel
Refer to your washer’s user manual for instructions on removing the front, back, or bottom panel to access the pump.

3. Drain Any Remaining Water
Place a bucket or towels under the washer and disconnect the drain hose to catch leftover water.

4. Disconnect the Drain Pump
Carefully detach the electrical connections and hoses attached to the pump. Use pliers if needed to loosen clamps.

5. Install the New Pump
Secure the replacement pump in place, reconnect the hoses and electrical wires, and tighten clamps and screws.

6. Reassemble the Washer
Replace the panel and ensure all screws are tightened properly.

7. Test the Washer
Plug the washer back in, turn on the water supply, and run a short cycle to confirm the new pump works correctly.

Where to Find Replacement Drain Pumps in Hawaii

If you’re located in Hawaii, PRS Parts Inc. is your go-to local supplier for high-quality appliance parts. Based in Honolulu, this trusted company stocks replacement drain pumps for a variety of washer brands, along with other essential appliance components.

Why Choose PRS Parts Inc.?

  • Local Expertise: Supporting Hawaii residents with top-notch service and product knowledge.
  • Comprehensive Inventory: A wide range of genuine parts to meet your appliance repair needs.
  • Convenient Location: Shop locally without waiting for lengthy shipping times.

Final Thoughts

Replacing a washer’s drain pump is a manageable DIY task with the right tools and guidance. Keeping your appliance in top working condition helps you avoid costly repairs down the line. For reliable appliance parts in Honolulu, turn to PRS Parts Inc., a local company dedicated to supporting Hawaii’s appliance repair needs.

Visit PRS Parts Inc. today to find the perfect parts for your washer and more

Back to blog